Useful Guides About Patch Panels

By C. Hunterr

Patch panels are sets of plugs and cables. They are connection panels that link the network cables. The facade of patch panel contains ports that are connected to punch down the blocks on the rear side. Ports found on the front part of the panel are utilized to cease the network cables. Network cables are protected against damage and the infrastructure wiring closets are organized through the help of a patch panel.

Patch panels are essential because they operate as nexus for huge amounts of connections. The junction of the panel maintains the quality of the connection and creates the repairs and modification faster. These panels cut down the period it requires to make a new one or locate an existing connection.

These panels are commonly applied in cable and telecommunication services. They are also utilized in audio-visual systems in order to handle various pieces of equipment. Moreover, any person with numerous interconnected devices can employ these panels.


Patch panel works as a class of sophisticated power strips. The more they become uniform, the more they are able to assist the diffusion of electricity, signals and data. However, possessing several connections in propinquity customarily produces problems in terms of cross-wires and interference. In addition, human error should be taken into consideration, for the reason that distinguishing different connections can be a difficult task when there is a mess.

Also, deficiency in the panels may lead to interference to all the linkages because of the centralization. Present a lasting solution if the connections require more concrete base and fewer need for matrix panels and switching e.g. termination panels and break boxes.

Patch bays or jack fields are also called patch panels. They can be covered in a wiring closet, rack-mounted or open-faced. Recently, fuse boxes are also considered as patch panel. Like for instance, in radio, television and recording studios, patch bays or panels are often utilized to help the connection of different pieces of broadcasting equipment like amplifiers, recording gear, reverb, compression, electric instruments, and microphones. Patch bays link various devices in different arrangements for several projects because the modifications can be done at the panel. Also, patch bays can resolve problems like ground loops easily. Utilizing a patch bay protects the instruments and studio gear’s input jacks from damage because the connections are created with the panel. Patch panel gives several ports that link up connectivity hardware or other user devices.

In relation to the above-mentioned information, here are the instructions in attaching network infrastructure cables to the patch panel. Employ a stripper to cut off three inches (3′) of the jacket cover from the cable and show off the wires; then flatten the end of the each wire. Slip every wire end into a hole or block at the rear of the panel according to the pin. Each pin has corresponding colors. Be assured that every end of the wire extends further than the frame of hole. Use a punch down tool to lock each wire to its own slot. Before tightening up, the cut marker on the blade needs to be pointed to the punch down wires. Repeat the procedure for every cable that you want to attach to the patch panel.

About the Author: Are you looking for more information regarding

patch panels

? Visit



Permanent Link: